Frame not sitting flat on the wall? Try this!
If your frame does not sit flat on your wall, loosen corner connector screws so they are not as tight! This should allow the frame to sit flat on the wall. You can also re-insert the print, making sure to go to opposite corners so that the fabric is pulled evenly to all sides so one corner is not pulled tighter than the rest!
Artwork loose? We recommend trying this
If your artwork is not sitting taut in the frame we suggest re-inserting your print like this; Start corner by corner, inserting the edges into the frame, but moving diagonally across from each corner until all four corners are inserted. From there you would then start in the middle of the frame and smooth the remaining edges down, starting in the middle and flattening them all the way to the inserted corners. Repeat this on all sides until your print sits taut in the frame!
Want to change your BIG Wall Decor up? Try these tips!
Don’t like the colors in your space/want something new? Purchase a print-only for an infinity frame and change your art! You are not stuck with one artwork once you purchase, you can purchase multiple prints for 1 frame! (Maybe from here add exchange process/how to purchase new print)
You can also orient your artwork any way you want with our handy signature removal option. Simply change the frame in a different orientation and change your artwork up