How To Guide for Applying Large Stickablez Peel and Stick Canvas Art

How To Guide: Applying Large Stickablez 

Peel & Stick Canvas Art

Turning your space into something impressive with Stickablez is easy and hassle-free, even with large pieces. Let's walk through the best method to install large-sized Stickablez, ensuring a smooth application every time.

Step 1: Prepare Your Surface & Print

Before you begin, make sure your wall is clean, dry, and free of dust. Use a mild cleaner to wipe down the surface and let it dry completely. This ensures that your Stickablez will adhere properly and last longer. Unroll your Stickablez artwork and let it lay flat for a few minutes to relax any curls. This will make the application easier.

Step 2: Gather Your Tools

For this installation, you'll need:

6-8 pieces of masking tape

A squeegee or a credit card

Scissors

Step 3: Tape the Top Corners

Next, tape the top corners of your Stickablez to the wall. This will help you position the art correctly without it falling down.

Step 4: Create a Hinge in the Center

To keep your Stickablez in place while you work, create a "hinge" in the center of the print. Apply a piece of masking tape at the top middle point and another piece at the bottom middle point. This hinge will hold the artwork steady and prevent the adhesive side from folding onto itself.

TIP: Remove the liner from the corner and carefully tape the sticky corner to the wall. This will make it easier to handle the artwork as you peel off the rest of the liner.

Step 5: Peel the Liner

Slowly peel the liner off this half of the Stickablez. To make things easier, carefully cut the liner off in the center, away from the wall. This half will now be liner-free and ready to stick.

Step 6: Squeegee from the Center Outward

Take the corner (without liner) that was taped back to the wall off, and hold it at a 45-degree angle away from the wall. This will help you control the application and prevent bubbles. Using a squeegee, start from the center and work your way out, pressing the Stickablez onto the wall. Work a couple of inches at a time, moving outward to smooth out any air bubbles. Once you get further along, begin squeegeeing up and down until this half is completely adhered to the wall.

 
Step 7: Repeat on the Other Side

Now, repeat the same process on the other side. Remove the remaining liner, hold the corner at a 45-degree angle, and squeegee from the center outwards. Make sure to smooth out any air bubbles as you go.

Final Touches

Once both sides are adhered, give the entire Stickablez a final smooth down with the squeegee to ensure it's fully stuck to the wall without any bubbles.

Enjoy Your New Art!

Stand back and admire your perfectly installed Stickablez wall art. You've just upgraded your space with a beautiful, easy-to-install piece of art, turning it into something you can be proud of.

Stickablez make it simple to refresh your decor without the commitment or damage. With this method, installing large Stickablez is a breeze, giving you a professional-looking result every time. Happy decorating!